You should change your password to something different as soon as possible.  Choose the “Change Password” command in the Admin menu to change your password.[.KC-405.]

There is currently another KeyConfigure connected to the same KeyServer.  You will have read-only access to the KeyServer.  If you need full access, please try again later. (^1)[.KC-545.]

There is currently another KeyConfigure connected to the same KeyServer.  Would you like to forcibly terminate the other session? (^1)[.KC-540.]

You are currently running KeyConfigure on a machine that is also running KeyServer.  Do you wish to access this local server, or would you like to access the KeyServer you have Chosen with KeyAccess?[.KC-530.]

There was an error while changing the assistant’s privileges.  The old privileges may still be in effect.[.KC-415.]

There was an error while changing your password.  Your old KeyConfigure password may still be in effect.[.KC-410.]

You have mistyped your KeyConfigure password.  If you do not know your password, please consult the KeyConfigure user manual.[.KC-400.]

You have failed to type the correct password, so you will not be able to access the KeyServer.[.KC-390.]

That is not the right password.  
Check the caps lock key and try again.[.KC-380.]

A communication socket could not be opened between KeyConfigure and the KeyServer.  Please open the Chooser and make sure that AppleTalk is active.[.KC-80.]

The Active Controls file is corrupted.  You may view and copy the Active Controls.  Consider restoring the Active Controls file from a backup copy.[.KC-75.]

KeyConfigure could not download all of the Control information.  This could be due to heavy network traffic or a busy KeyServer.  Choose “Connect” in the File menu if you want to try again.[.KC-70.]

A KeyServer has been found, but is not answering.  You may be trying to connect to an incompatible version of the KeyServer.  Switch to a compatible KeyConfigure, or use the Chooser to select a different KeyServer.[.KC-65.]

The KeyServer you are trying to connect to is incompatible with this copy of KeyConfigure.  Switch to a compatible KeyConfigure, or use the Chooser to select a different KeyServer.[.KC-60.]

The KeyAccess driver required by KeyConfigure could not be found.  You must put the “KeyAccess” file into the active System Folder and restart your Macintosh.[.KC-50.]

The KeyServer could not be located.  Select “Chooser” from the apple menu ⌃, click on the “KeyAccess” icon, and select a KeyServer.[.KC-30.]